Offshore glossary
Plain-English meanings of the acronyms and terms you'll see in offshore job postings, training requirements and Bay du Nord news.
Working offshore
- BSTBasic Survival Training
- The offshore safety course everyone needs to work on an installation off Atlantic Canada, including helicopter underwater escape training. Renewed every three years with a shorter recurrent course. More
- BST-RBasic Survival Training Recurrent
- The shorter refresher that keeps BST current. More
- OSIOffshore Survival Introduction
- A short safety course for people making only brief visits offshore. More
- HUETHelicopter underwater escape training
- Practice escaping a helicopter that has ditched and flipped in water, done in a pool simulator as part of BST.
- CA-EBSCompressed air emergency breathing system
- A small air supply worn on offshore helicopter flights so passengers can breathe underwater while escaping. Training on it is part of BST.
- Offshore medicalOffshore fitness-to-work medical
- A medical exam you must pass before taking BST and going offshore. More
- H2SHydrogen sulphide
- A toxic gas that can be found in oil and gas operations. H2S awareness training is one of the four offshore basics. More
- WHMISWorkplace Hazardous Materials Information System
- Canada's system for labelling hazardous products and training workers to handle them safely. More
- STCWStandards of Training, Certification and Watchkeeping for Seafarers
- The international convention that sets minimum training for ship crews. Vessel jobs often ask for STCW basic safety. More
- MEDMarine Emergency Duties
- Transport Canada safety training for seafarers: firefighting, survival craft and emergency procedures.
- GMDSSGlobal Maritime Distress and Safety System
- The international radio system ships use for distress alerts and safety communications. Some marine jobs need a GMDSS certificate.
- CoCCertificate of competency
- A Transport Canada certificate that qualifies ships' officers and engineers for a given role and vessel size. More
- Red SealRed Seal endorsement
- The interprovincial standard of excellence for skilled trades, recognized across Canada. More
- P.Eng.Professional engineer
- The licence engineers need to practise. In Newfoundland and Labrador it's issued by PEGNL. More
- DPDynamic positioning
- A computer-controlled system that keeps a vessel or drilling rig in place using its thrusters instead of anchors. DP operators run it.
- OIMOffshore installation manager
- The person in overall charge of an offshore installation and everyone on board.
- HLOHelicopter landing officer
- The person who manages the helideck when helicopters land and take off.
- PoBPersons on board
- The number of people on an installation or vessel at a given time, tracked for safety and musters.
- FRCFast rescue craft
- A small, fast boat kept ready on installations and standby vessels for rescues.
- TEMPSCTotally enclosed motor propelled survival craft
- The enclosed lifeboats used to evacuate an offshore installation.
- PTWPermit to work
- A written approval needed before risky jobs like hot work or confined space entry can start.
- JSAJob safety analysis
- A step-by-step review of a task's hazards and controls before the work begins.
- PPEPersonal protective equipment
- Hard hats, gloves, coveralls, safety glasses and other gear that protects workers.
- RotationWork rotation
- The pattern of weeks offshore and weeks at home. Three weeks on and three weeks off with 12-hour shifts is common off Newfoundland.
- Hitch
- One stretch of work offshore, from when you fly out to when you fly home.
- Day rate
- Pay quoted per day worked instead of per hour or per year. Multiply by the days you work in a year to compare it with a salary.
- RoughneckRoughneck (floorhand)
- A drilling crew member who handles pipe and equipment on the rig floor. More
- Roustabout
- An entry-level labourer who moves materials and keeps the rig or platform running. More
- Toolpusher
- The supervisor in charge of a drilling crew and the rig's day-to-day drilling operations. More
- Derrickhand
- A drilling crew member who works high on the derrick handling pipe and looks after the mud pumps. More
- Motorhand
- A drilling crew member who maintains the rig's engines and equipment. More
Rigs, platforms and subsea
- FPSOFloating production, storage and offloading vessel
- A ship-shaped facility that processes oil from subsea wells, stores it, and offloads it to tankers. Terra Nova and SeaRose are FPSOs, and Bay du Nord is planned around one.
- GBSGravity-based structure
- A huge concrete base that sits on the seabed and supports a platform. Hibernia and Hebron use them; both were built at Bull Arm.
- MODUMobile offshore drilling unit
- A drilling rig that can move between locations, such as a semi-submersible or drillship.
- SPSSubsea production system
- The equipment on the seabed that produces oil from the wells: trees, manifolds and controls.
- SURFSubsea umbilicals, risers and flowlines
- The pipes and cables that connect subsea wells to the production facility.
- XTChristmas tree
- The assembly of valves on top of a well that controls flow and keeps the well safe.
- BOPBlowout preventer
- A set of large valves on a well that can seal it during drilling to stop an uncontrolled flow.
- ROVRemotely operated vehicle
- An unmanned underwater robot, controlled from the surface by a tether, used for inspection and subsea work.
- AUVAutonomous underwater vehicle
- An underwater robot that runs a programmed route without a tether, often for seabed surveys.
- ManifoldSubsea manifold
- A seabed structure that gathers flow from several wells into shared flowlines.
- Umbilical
- A bundled cable that carries power, control signals, hydraulics and chemicals to subsea equipment.
- Riser
- The pipe that carries fluids between the seabed and a floating facility.
- PLETPipeline end termination
- A seabed structure at the end of a pipeline that provides a connection point.
- PLEMPipeline end manifold
- A seabed structure at the end of a pipeline that joins several lines together.
- UTAUmbilical termination assembly
- The seabed end of an umbilical, where it connects into subsea controls.
- SCMSubsea control module
- The unit on a tree or manifold that operates subsea valves and sends back sensor data.
- SCSSVSurface-controlled subsurface safety valve
- A safety valve deep in the well that can be closed from the surface.
- SSIVSubsea isolation valve
- A valve on the seabed that can shut off a pipeline or riser in an emergency.
- HIPPSHigh-integrity pressure protection system
- An automatic safety system that closes valves fast to stop pipelines being over-pressured.
- ESDEmergency shutdown
- The system that shuts down and isolates equipment, or a whole facility, in an emergency.
- MEGMono-ethylene glycol
- A chemical injected into flowlines to stop ice-like hydrates from forming; it is recovered and reused.
- Topsides
- Everything above the hull or base of a platform: processing plant, accommodation, helideck and drilling equipment.
Projects and contracts
- FEEDFront-end engineering design
- The engineering stage that firms up a project's design, cost and schedule before the final investment decision. Bay du Nord's FEED contracts were awarded in April 2026. More
- FIDFinal investment decision
- The owners' formal decision to go ahead and build. Equinor expects Bay du Nord's in early 2027; it has not been made yet. More
- First oil
- The day a field starts producing. Bay du Nord's is expected in 2031. More
- EOIExpression of interest
- A notice asking suppliers to say they're interested in a contract package. Equinor posts them for Bay du Nord.
- Benefits agreement
- A deal between the province and an operator on local jobs and spending. Bay du Nord's, signed in March 2026, commits at least 95% of subsea fabrication to the province. More
- EPCIEngineering, procurement, construction and installation
- A contract where one company designs, buys, builds and installs a part of the project.
- Operator
- The company that runs a field on behalf of all its owners. Equinor is Bay du Nord's operator.
- Working interest
- A company's ownership share of a field, which sets its share of costs and production.
- EIAEnvironmental impact assessment
- The review of a project's environmental effects that must be done before approval. Bay du Nord was approved in April 2022. More
- HAZIDHazard identification study
- An early workshop to list what could go wrong in a design or operation.
- HAZOPHazard and operability study
- A detailed, line-by-line review of how a process could deviate from its design and what happens if it does.
- ALARPAs low as reasonably practicable
- The safety principle that risks must be reduced until further reduction would cost far more than the benefit.
- SIMOPSSimultaneous operations
- Two or more operations running at the same place and time, such as drilling and production, planned together for safety.
- FATFactory acceptance test
- Testing equipment at the maker's shop to prove it meets the specification before it ships.
- ITPInspection and test plan
- A document listing the inspections and tests for a piece of work and who must witness them.
- MTOMaterial take-off
- A list of the materials needed to build something, counted from the drawings.
- AFCApproved for construction
- The drawing status that means fabrication can start.
- CAPEXCapital expenditure
- Money spent building a project: fabrication, installation and drilling.
- OPEXOperating expenditure
- The ongoing cost of running a field once it's producing.
Regulators and organizations
- C-NLOERCanada-Newfoundland and Labrador Offshore Energy Regulator
- The joint federal-provincial regulator for offshore energy off Newfoundland and Labrador. It was called the C-NLOPB until June 2, 2025, when its name changed and it took on offshore renewables.
- CAPPCanadian Association of Petroleum Producers
- The industry association that publishes the safety training standard for offshore workers in Atlantic Canada.
- Energy NL
- The province's oil, gas and energy industry association, formerly Noia.
- PEGNLProfessional Engineers and Geoscientists Newfoundland and Labrador
- The body that licenses engineers and geoscientists in the province.
- NOCNational Occupational Classification
- Canada's code system for jobs. Job Bank's wage figures, which the pay estimator uses, are organized by NOC code.
- Grand Banks
- The shallow part of the continental shelf southeast of Newfoundland, where Hibernia, Hebron, Terra Nova and White Rose sit.
- Flemish Pass
- A deep-water channel east of the Grand Banks, where Bay du Nord is, in about 1,100 m of water.
- Bull ArmBull Arm fabrication site
- The large fabrication yard in Trinity Bay where the Hibernia and Hebron platforms were built.
Started from the acronym list in the old BDN terminal, corrected and expanded. Entries that couldn't be confirmed were left out. Spot a mistake? Email info@bdnsupplierdirectory.ca.